YN-100 is a four-system full-band high-precision surveying antenna supporting GPS/BDS/GLONASS and GALILEO, which can meet the needs of Bei Dou III and Multi-system compatibility of measurement equipment, it can be widely used in surveying and mapping, marine surveying, geological monitoring, bridge deformation monitoring, automated harbor, agricultural drones and reference stations for unmanned vehicles applications
RTK GNSS Antenna YN-100
·Support four-system full-band
·Small size, light weight, compact structure
- Overview
- Key Features
- Parameters
- Related Products
Overview
Key Features
1. Passive antenna with high gain, wide beam width, low elevation angle signal reception effect is good, can receive satellite signal in serious blocking environment
2. Passive antenna with wide working band can support multi-system & multi-frequency points well, especially the global networking B3 frequency point and L5, L-band frequency point, greatly improving the stability of the system
3. Small Size, light weight, compact structure
4. Antenna out-of-band rejection is high, can effectively avoid base station and other signal interference caused by system instability
Parameters
| Product Parameters | |
| PERFORMANCE | |
| Signal Received | GPS L1/L2/L5 BDS B1/B2/B3 GLONASS L1/L2/L3 GALILEO E1/E5a/E5b/E6 L-Band |
| Antenna Impedance | 50Ω |
| Polarization | RHCP |
| Axis Ratio | ≤3dB |
| Azimuth Coverage | 0°～360° |
| VSWR | ≤1.5 |
| Maximum Gain | 5.5dBi |
| Phase Center Error | ±2mm |
| LNA | |
| LNA Gain | L1: 32±2dB L2: 32±2dB |
| Noise Figure | ≤2dB |
| VSWR | ≤2.0 |
| Passband Ripple | ±2dB |
| Operating Voltage | DC3.3~12V |
| Operating Current | ≤50mA |
| MECHANICAL | |
| Dimensions | Φ122*17.3mm |
| Weight | ≤100g |
| Mounting | Through 4 screw holes |
| Connector | SMA Male |
| Cable Length | 300mm |
| ENVIRONMENTAL | |
| Operating Temperature | -40℃～+85℃ |
| Storage Temperature | -55℃～+85℃ |
| Humidity | 95% Non-condensing |
Applications
Related Products
